How to Write a Good Introduction to Your Article
Ideally, an introduction should tell readers what to expect from the rest of your article. It should also give a background information about your topic and situate it in the field.
A Marine Corps veteran of 30 years is the newest to be awarded a truck through Progressive Insurance’s Keys to Progress Program. James Rose of Kathleen, Georgia was awarded the 2019 Freightliner Cascadia and $50,000 towards the cost of starting a business.
Transponder Keys
Transponder keys (also called microchips) are found in the majority of modern vehicles. This technology is designed to stop car theft since it only allows the owner of the vehicle to start it. The keys are more expensive than conventional flat keys, but offer a level security that is worth the cost.
Transponder keys contain the microchip which transmits an identification code with an alert when the key comes within range of the antenna. This signal is read by a receiver that is located close to the ignition switch of your vehicle. The transmitter and receiver communicate with each other to determine if the correct code is in place. This process is referred to as "hotwiring" and can be prevented by using transponder keys, which sends out a signal with a different serial number every time the key is turned on in the ignition.
General Motors invented the first transponder keys in the 1980s. truck key copy invented the VATS system as a method to combat the rising Corvette theft rate. Since then, the majority of major automakers have integrated the technology in their cars.
Typically, a transponder key will look exactly similar to a standard car key, with the exception of a plastic top that houses the transponder. This type of key can be cut in several different ways, like cutting it with a standard saw laser cut, a laser cut, or a sidewinder cut. Some transponder key have a blade, while other are bladeless.
Some transponder keys may also be activated via the remote control. They transmit a unique identification code in addition to an unique code. This type of key can be programmed to lock and unlock your car doors, switch on the engine, and turn off the lights. It can also be used to operate the panic button in case you are in an accident.
It is important to keep in mind that not all transponder car keys are alike, and some cannot be duplicated with a standard key cutting machine. Contact an automotive locksmith in case you aren't sure what type of car key you have. They can help you determine which key will work for your vehicle.
Keys for VATS
VATS keys, also known as Vehicle Anti Theft System, are an integral feature of many GM cars. They are a great security measure against theft of cars and function by sending an alert each when the key is turned. The signal is then transmitted to the engine control module and informs it that a functioning key is present. The module then sets the ignition lock cylinder to accept the correct key to start.
The signal is transmitted by two very small wires in the key. The wires can be damaged and cause your car to start. You'll observe that the security light remains on or you must turn the key a few times before it gets started. This is due to various ways the signal could go out. The most common way is that the key is being turned incorrectly or it has been lost. Another way is if the ignition switch was replaced with one that's not compatible, or when you use an aftermarket key. This is because different keys may have a resistor that is different from the one that is being transmitted to the engine control module.
A VATS interrogator is an excellent method to test the VATS module. This tool can be used by a locksmith or dealer to read the key. It also comes with an inbuilt VATS code calculator that will determine the resistance value of your key. You can also test the key by hand to determine its resistance. This method could be time-consuming as there are fifteen different resistance values for keys.
There are two kinds of VATS keys: a single cut 6-cut sided key and a 10-cut double sided key. The only difference is that keys cut in 6-cut have a smaller bow or head than keys that are 10-cut. It is important to note that the possibility of contamination of the leaf contacts as well as key pellets in the ignition lock cylinder can cause a no crank condition. Liquid lubricants shouldn't be applied to the key bow or pellet. Powdered graphite is a great lubricant to use on the key cylinder.
Key Fobs
The majority of people think of a key fob as an electronic device that replaces traditional keys to unlock a car, home or apartment. They use an RF transmitter with a short range, radio frequency identification (RFID) chip and antenna to communicate with a wireless receiver within the device they're controlling. The receiver is able to adapt to the unique signal code of the key fob which corresponds to the RFID tag information.
Key fobs can be programmed to do numerous things, aside from locking and unlocking doors. They can also be used to control home automation systems like Z-Wave. With a smartphone app you can program each key fob button to run one or more Z-Wave scenes. Key fobs can even turn on the air conditioner or furnace in advance of your arrival and set it to the perfect temperature for you.
You can also make use of your key fob to remotely lower the windows in your car. Some minivans, for instance allow drivers to do this using the key fob instead of manually rolling them up or down using their hands. In the event of a burglary alarm, it can be activated with a key fob simply by pressing the panic button. The alarm's loud, enthralling roar will deter criminals and give you time to call the police.
The lost key fob could be located using your phone. You can use an application to make your fob emit loud noises until it is located. This is especially helpful in crowded parking areas, where it's easy to be distracted by other drivers and lose your keys.
The battery of a key fob will need to be changed periodically. The batteries that look like coins are typically found in hardware stores as well as automakers' parts departments and a few big-box stores. Many people can swap the batteries themselves but it's best to read your owner's manual or watch online videos for directions.
Some key fobs are easily cloned, but the newer models have encryption to prevent this. This makes it harder to copy them, particularly when a cloner isn't aware of the encryption system.
Keyless Entry
Keyless entry systems work by using a transmitter that can be controlled remotely from the key fob to unlock or start the vehicle. The transmission is based upon the signals sent by the fob, and is encrypted to stop unauthorised access. Certain keyless systems also employ rolling codes to guarantee security which is crucial for fleet vehicles.
Remote keyless systems can add convenience to cars by opening the doors before you reach the handle or leave. It also turns on your lights when you walk towards the vehicle, and also activate other 10 accessories depending on proximity. These systems are becoming increasingly popular in vehicles and trucks and offer increased convenience in many situations.
Installation is simple and requires just few tools. The installation manual will include an illustration of the wiring that outlines the exact wires that connect to the keyless system in your car. You'll probably need to remove the cover on your steering wheel to access the wiring. Then, wrap the wires exposed in black electrical tape.
When not in use, it is important to keep your key fob in a safe place that blocks signals. To minimize the risk of theft, you should park your vehicle in a location that is secure. For added protection you can also install an GPS tracking device inside your vehicle to track its location and alert you when it leaves a designated area.